You will need:
- Fabric of your choice
- White fabric
- Embroidery Hoops (varying sizes)
- Hot glue gun
- Scissors
- Iron
- Spray Paint (optional)
Here is the lineup. I choose 3 out of 4 of my fabric choices from the small pre-cut rectangles at joanns. And all I had was chalkboard paint, but I just really needed black.
Spray the outer rings of the hoops. (You could always leave them alone, but all the wood in our living room is dark so..)
You will need to iron the fabric. Take your time and use a spray bottle to make it easier.
I put white in the each hoop first so it wasn't see through. Only attach to the center hoop. I stretched it and hot glued it onto the rim. Make sure you are pulling it tight and evenly.
Cut off the excess fabric after it has been glued around.
Cover the remaining inner rings with the white fabric. After the hoops have dried you are ready to assemble them.
Place the fabric over the inner ring and attach the outer ring the hold it in place. Pull the fabric tight around it.
Flip it over and cut off the excess. Leave a little edge to glue down around the inner ring.
Repeat with the other hoops.
& VOILA! I love how the black looks and it matched our living room furniture. Now I have to find a spot to hang them! Will post a photo when they are up later!
This project has so many possibilities and it is super cheap! The hoops were $1.50 each, the fabric squares were $1.50 and I already had the hot glue and the spray paint. I think it ended up being about $10-$12 dollars! And they will hang on straight pins I think! :)
No comments:
Post a Comment